25′ Satin Internal Halyard Flagpole

These deluxe internal halyard flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. These deluxe internal halyard flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals. The improved winch is gearless and self-locking at any point, eliminating the need for a separate brake. Additional Information: # of Sections – 1; Exposed Height – 25′: Overall Length – 27′; Butt Dia. – 6″; Top Dia. – 3.5″; Wall Thickness – .250; Unflagged Max. Wind – 255 mph.; Max. Flagged Wind Speed – 150+mph; Flag Size – 4′ x 6′; Shipping Weight – 233 lbs. This direct drive winch provides rapid raising and lowering of the flag with little effort. This new, improved design does not require any welding, thus avoiding discoloration when an anodized finish is desired. No monthly lubrication is needed and this winch system is easily adaptable to existing on-site flagpoles. Please inquire about our Black, Bronze and Clear finished flagpoles! ⚠ Prop 65 WARNING